|
 (WinCE).JPG) |
X7 Low Profile Cyclone Hopper
This is the X7 Low Profile Cyclone Hopper for Tippmann's X7 marker. It can be used with any Cyclone System; X7, A5, 98 Cyclone.
|
|
| |
 |
Dogleg Stock Air Thru - Right Hand
The Dogleg Air-Thru Stock has an innovative design that allows the shooter to achieve a sightline unequaled by other paintball stocks. The stock "doglegs" around the shooter's head and returns to rest securely on the shoulder. It is made from solid machined and formed aluminum and has an over-molded (integrated)air line. Features also include a stainless steel braided air line and high performance ASA fitting.
Length: 11 inches
Bow offset: 2 inches (measured from center)
|
|
| |
 |
Camo Form
Camo Form - MARPAT (Woodland Digi) This is perfect wrap for markers, guns and equipment. It's not a tape, but a wrap that clings to itself. Washable.
|
|
| |
 |
Pscho Ballistic Squeegee
Pscho Ballistic Squeegee is one of the best on and off the field squeegees.
|
|
| |
 |
Vortex Mod by TechT
The Vortex Mod is hard-coated aluminum internals that replace the stock plastic internals of the A5 and 98 Cyclone Feed.
The vortex mod is designed to take the Cyclone Feed to the next level!!!
Our testing has shown that the Vortex Mod will allow the Cyclone feed to work at lower pressures, feed faster, and last longer than the stock internals.
This product is one of the hottest after market upgrades ever released for the A5 and Tippmann 98 owners that have upgraded to the Cyclone Feed. The Vortex Mod will feed upwards to 25-26 balls per second at pressures as low as 200psi. Stock parts only feed at 15 BPS and only down to 400 psi.
STOP REPLACING STOCK PLASTIC INTERNALS!!
http://www.techtpaintball.com/vortexdemo.mov
|
|
| |
.jpg) |
Lightening Rod by TechT
The Lightening Rod is our latest modification for increasing the performance of your Tippmann Cyclone Feed.
The Lightening Rod is designed to work in conjunction with our Vortex Mod, and together, the two parts will yield higher rates of fire- approximately 30 BPS!
The secret to the performance gains is the brass bushing located where the ratchet and piston rod met. The bushing is not visible in this picture, but will be in pictures to come.
The Lightening Rod is made of anodized billet aluminum, and the bearing is a sealed swiss bearing.
The Lightening Rod lowers the operating pressure of the Cyclone feed by 100 psi. When used with the Vortex Mod a player can obtain the lowest possible operating pressure for the Cyclone Feed.
This is the next step in making your cyclone even faster and more efficient!!!
|
|
| |
.jpg) |
Quick Exhaust Piston Housing by TechT
Here is a first look at our new Quick Exhaust Piston Housing for the Cyclone Loader. The QEPH is designed to rapidly vent the blast of air that is used to advance the loader. By venting the gas quickly, the loader responds instantly. This equates to faster loading with lower pressure.
The standard A5 piston housing has no venting ports (very bad). X7 Piston housing has forward exhaust ports only (better). Meaning that it only exhausts the air that is in front of the piston....not behind it. Its the air behind the piston that is doing all the work and really needs to be vented in order for faster loading.
Our QEPH is a forward and reverse exhaust tube. It exhausts the air in front the piston during the piston stroke and behind the piston at the end of the piston stroke. Venting the air in front of the piston in the early part of the stroke means that less pressure is needed to advance the loader and venting the air behind the piston allows the loader to return faster.
We were never impressed with the exhausting capacity of putting a normal QEV on the cyclone, and after seeing the X7 piston housing we decided to take it to the next level. We've combined those venting ideas into one part.
The materials we use are better than that of the stock piston housings, the internal finish is much smoother and is teflon coated, they perform much better (increasing speed and efficiency), and they look way cooler.
This part is designed to do what the normal QEV (Quick Exhaust Valve) attempts to do. With the QEPH there are no gaskets to keep clean, and its exhaust is exponentially faster.
All the QEPHs have polished internals and are teflon coated.This makes for the smoothest action.
|
|
| |
.jpg) |
Gun Sav by TechT
Lubrication is the life giving blood to any paintball marker. No matter if you shoot a DM, Autococker, Ion, or Tippmann, your marker REQUIRES lubrication.
Throughout 2006, we at TechT have been messing around with various recipes and mixtures looking for paintballs' "perfect lubricant".
Our goal was to produce a SUPER SLICK grease, that a wasn't too thick, but wasn't too thin either. We feel that Gun Sav is that perfect balance.
All greases are slick....but this stuff is super slick. Most greases are thick. For most paintball applications we feel that "paintball greases" are too thick. It's the thickness of any grease that causes what we call "stiction". This is were the thickness/tackiness of the grease actually holds the part in one place. This tackiness slows down your marker and makes for less consistency and efficiency.
|
|
| |
.jpg) |
L7 ION Bolt by TechT
The L7 is the latest in Ion bolt technology. It takes speed, accuracy and reduced kick to a level paintball has never seen.
The L7 weights just 8.5 grams, making it the lightest bolt in paintball history!
The reduced weight of the L7 along with its teflon impregnated surface and high flow face make it the best Ion bolt available.
Due to the way that the Ion operates, reducing the weight of the bolt allows for the lowest possible dwell settings and the highest rates of fire.
Its commonly known in paintball that the larger you make the firing chamber the more you can lower your gun's operating pressure.
L7 takes both of these ideas to the EXTREME!!!
Due to our patent pending <----(fair warning to all the wanna be copy cats) "back plug" design, the L7 has the largest firing chamber of any Ion bolt.
The new plug is a stationary part that is designed to seal and maximize the size of the firing chamber. The front oring seals the firing chamber, and the back one is used to hold it in place.
This bolt has tested to be the fastest and most accurate (consistent) bolt we at TechT have ever shot.
It is compatible with all firing chambers and bodies.
|
|
| |
.jpg) |
RVA - JCS A-5
The JCS RVA Upgrade allows you to
adjusts the Rear Bolt Spring
optimizes your air usage and increase your marker performance with this RVA by JCS >>> This JCS RVA for A-5's is set apart from the rest because it has two mounting holes for JCS Folding Stock Upgrades... see our accessories page.
|
|
| |
|
